淋雨试验箱主要用于电子电工产品考核外壳和密封件在水试验后或在试验期间能否保证设备和组件良好的工作性能.
淋雨试验箱特点 |
◆ 采用人机界面可编程控制使操作简单便捷
◆ 采用伺服驱动系统，提高精准度和模组化生产
◆ 纯水系统多重过滤，达到真正99%循环用水
◆ 大视窗可目视实验全过程
◆ 任意摆管角度直接贴触输入，方便直观无需手动调节
◆ 实验有效角度10度～320度任意角度调整
淋雨试验箱应用标准 |
符合GB10485-89 GJB150.8-86 GB4208-2006 GB4942-93等国家标准。
淋雨试验箱技术参数 |
| Models | BY-LX | BY-LX | BY-LX |
| Dimensions of working room | 800X800X800 | 1000X1000X1000 | 1500X1500X1500 |
| Dimensions | 1020X1200X1000 | 1220X1400X2000 | 1700X1900X2500 |
| Acreage of test platform | ∮mm(Description of order) | ||
| Diameter of speaying hole | ∮0.4/1.2mm(Description of order) | ||
| Interval of spraying holes | 50/12.5mm(Description of order) | ||
| Radius of spraying ball | R375/500mm | ||
| Diameter of speaying pipe | ∮16mm | ||
| Swing of swing pipe | 6009001300 | ||
| Spraying angle of swing pipe | ±600、±900 | ||
| Adjustment of swing speed | Stepless | ||
| Spraying water pressure | about 80 kpa,98kpa adjustable | ||
| Water pressurecontrol | Flow meter | ||
| Time relay | Imported micro-PC time-programmable integrated controller(Moller) | ||
| Controller | Imported frequency converter | ||
| Rotation speed of test platform | 1-17r/min | ||
淋雨试验箱结构特点 |
 |  |
 |  |
所有评论仅代表网友意见，与本站立场无关。