地震仪ZET 由一个数字三轴高灵敏度地震接收器和数据记录器组成,它们被放置在一个紧凑的防爆外壳内。地震仪用于测量地震影响参数、近矿地面地震勘探性能、爆炸危险建筑物动态特性控制、输油管道泄漏检测、被动地震勘探。
地震仪优点
可记录振动速度从/sec开始
宽广的频率范围从到500Hz
可连续记录24小时
防爆外壳设计
10年质保
高精度,高可靠性
地震仪设置和控制面板位于防爆外壳的盖子下面:
“USB"端口-用于通过USB接口将地震仪连接到PC,以便进一步配置;
“SD"端口-用于通过USB接口将注册信号数据从地震仪非易失性存储器传输到PC;
“充电"端口-用于连接电池充电器。
地震仪的“POWER"键用于启动/停止数据记录过程,以及将地震仪连接到PC进行配置。
地震仪非常适合在控制区域临时安装(可以在地面和固体表面安装——钢、混凝土等)。
如果安装在固体表面上,则需要使用螺钉连接和安装孔(位于地震仪底部)将设备固定在测量区域。如果安装在地面上,则必须使用安装销(先前固定在地震仪安装点上)。
在研究区安装地震仪时,必须按方位(通常使用向北的方向)对准测量轴“X"。测轴方向显示在地震仪外壳表面
地震仪规格参数
Measuring channels specifications | ||
---|---|---|
Seismic recorder model | ZET 7156 | |
Measurement axes number | 3 (X, Y, Z) | |
Measured physical value | vibration velocity | |
Frequency range | from 0,3 up to 500 Hz | |
Measurement range | from 0,0002 up to 20 mm/sec | |
Measuring tolerance | 10 % | |
Relative interchannel overlapping ratio at the frequency of 20 Hz, max | 1 % | |
Instant values recording: sampling frequency | 50, 100, 250, 500, 1000 Hz | |
Measurements reliability control | sensing element integrity control, measuring circuit control
| |
Standalone mode | ||
Off-line mode – operation time, min | 24 hrs | |
Integrated battery full charge time, max | 6 hrs | |
Battery type | Li-Ion | |
Integrated non-volatile memory | 8 Gb | |
Integrated memory card recording time at maximum sampling rate, min | 150 hrs | |
Technical specifications | ||
Data transfer interface | Ethernet and USB Full Speed | |
Data exchange speed | 100, 300, 1000 kbps | |
General specifications | ||
Power voltage | 12 V | |
Consumed power | 1 W | |
Recorded data format | ANA/ANP conversion to CSV and SEG-Y formats via ZETLAB Software
| |
Explosion protection type | PB Exd I MB X explosion proof mark | |
Average lifetime | 10 years | |
Weight, max | 5 kg | |
Dimensions, max | 200×150×140 mm | |
Operation temperature range | ?20…+60 °C |
所有评论仅代表网友意见,与本站立场无关。