The FlexFilter 13 and 18 EX are high vacuum filters used in applications with a working vacuum of max. 40.000 Pa (5,80 psi). The filter can be used in applications where there is a high content of explosive dust particles.
The FlexFilter 13 and 18 EX are high vacuum filters used in applications with a working vacuum of max. 40.000 Pa. The filter is made in galvanized steel sheet which makes it a very competitive alternative to other high vacuum filters. The FlexFilter 13 and 18 EX can be used in applications where there is a high content of explosive dust particles. The filter can be supplied with either antistatic cartridges (UniClean) or antistatic cassettes depending on the air flow, the dust type and the dust concentration. The FlexFilter 13 and 18 EX can be delivered in two different heights – type L and A. The Ex-vents 410x410 are supported on the back side to allow vacuum max 0,4 bar. The cartridges/cassettes are cleaned automatically by a high-efficiency, low energy consuming compressed air system activated by an integral electronic controller. The filter is easy to maintain due to the following features:
- Quick release waste bin
- Inspection and change of the filter elements can take place within a few minutes
- Inspection and change of the filter elements can take place within a few minutes
应用 | 粉尘 |
证书 | CE, EX |
压缩空气需求 | 6 bar |
灰斗容量 | 50 or 100, or whitout |
清灰方式 | 脉冲清灰 |
安装 | 室内, 室外 |
材料 | Housing in galvanised steel sheet (4 mm) |
工作温度 | -20 to 75 Deg. C. |
适用于易爆粉尘 | Yes |
工作压力(千帕) | Max. 40.000 Pa.(5.80 psi) |
所有评论仅代表网友意见,与本站立场无关。