Hatch Cover tape keeps out moisture, weather, sound and fumes from your valuable cargo, the blue liner ensures a tight seal when installed according instructions.It has an excellent weather resistance to salt and weather conditions.This particular tape can installed between 5 and 40 °C and will stａnd from -15 to 70 °C.
舱盖胶带可防止湿气，天气，声音和烟雾从您的贵重货物，蓝色衬里确保一个紧密的密封时，根据说明安装。它对盐和天气条件有的耐候性。这种特殊的胶带可以安装在5到40°C之间，温度在-15到70°C之间。
Hatch cover tapes is to protect the metal hatch covers on carriage ships against leakage of water into the carriage area. Extreme weather conditions often damage hatch covers making them prone to leakage which may lead to the damage of goods being shipped.
舱口盖胶带是用来保护运输船上的金属舱盖，防止水渗漏到车厢区域。天气条件经常损坏舱盖，使舱盖容易发生泄漏，从而可能导致所装运货物的损坏。
| IMPA CODE | DESCRIPTION | UNIT |
| 232452 | Hatch Cocver Tape (Roll Tape) 100mmx2mmx20mtr | Roll |
| 232453 | Hatch Cocver Tape (Roll Tape) 150mmx2mmx20mtr | Roll |
• Characteristics:
20 meters of self-adhesive SBS bitume rubber compound
coated to a modified blue HDPE liner and release PE Liner.
• Temperature resistance:
Between -15 to +70 C.(Installation should be under from +5 C to +40 C)
• Shelf life:
24 months properly stored.
• 特点：
20米自粘SBS沥青胶料
涂于改性蓝色HDPE衬里和脱模聚乙烯衬里上。
• 耐温性：
在-15到+70摄氏度之间。（安装温度应在+5℃至+40℃之间）
• 保质期：
存放24个月。
• USING
1. Being the surface free from dirts&salt on which wouldlbe applied.
2. The surface must stay dry, before applying the tape.3. Under cold weather, the tape should be warm up with a torch for the best adhesive performance.The flame should be applied to the black surface after removing the release liner.Always be careful not to use a torch in fire danger areas.
4. Immediately after heating apply pressure to stick the tape onto the surface before the tape cool.This will ensure the best condition for adhesion
• 使用方法
1.表面无污垢和盐分，可用于表面。
2.贴胶带前，表面必须保持干燥。
3.在寒冷的天气下，胶带应该用手电筒加热，以获得粘合剂表演。那个移除释放装置后，应在黑色表面上使用火焰班轮。总是小心不要在火灾危险区域使用手电筒。
4.贴上加热胶带后，立即贴在加热表面,这个将确保粘合条件。
所有评论仅代表网友意见，与本站立场无关。