电池铝塑膜壳(Formed Pouch Cell Case with Air Receiver)
材料名称: 302525电池铝塑膜壳
应用：用于制作软包电池
标准包装：50片/包
Material Name：Formed Pouch Cell Case withAir Receiver
Application: for Formed Pouch Cell Case
Standard package：50pcs/bag
| 主 要 参 数 SPECIFICATION | ||
|---|---|---|
| 标准参数 Technical parameter | 坑尺寸 Case Dimensions | 封装后尺寸3.0T x 20W x 25L（mm） Outside Dimensions after sealing: 3.0 Thickness x 20 Width x 25 Length (mm)Copper Foam |
| 净重 Net Weight | 32g (50 pcs) | |
| 厚度 Thickness | 111μm±11μm | |
| 外表质量 Surface Quality | 喷砂面 Matte finish | |
| 针孔 Pinholes | 根据铝箔标准 Subject to the applicable aluminum foil standard | |
| 杂质 Impurity | 直径1mm及以下 1mm or less in diameter | |
| 白点 Fish Eye | 直径2毫米或更少(清晰),直径1毫米或更少(彩色) 2mm or less in diameter (clear), 1mm or less in diameter(colored) | |
| 水分蒸发率 Moisture Vapor / O2 Transmission Rate | 200ppm / 5 年 | |
| 压片强度 Laminate Strength | Nylon/Al 高于 2N/15mm Al/CPP 高于 5N/15mm | |
| 封口强度 Heat Seal Strength | 200℃时宽度大于 29.4N/15mm x 0.2Mpa x 2 sec | |
| 溶剂滞留 Solvent Retention | 小于5mg/m2 | |
| 外表 Appearance | 样品标准内 Within the sample of the limit | |
| 滑动系数 Slip Factor | CPP/CPP 低于1.0 | |
暂无内容
暂无内容
所有评论仅代表网友意见，与本站立场无关。