2023年08月19日 11:02:18 来源：广东宏展科技有限公司 >> 进入该公司展台 阅读量：50
电池安全性检测设备 -> 动力电池针刺试验机
电池针刺试验机通过针刺试验检验电池的安全性能，通过实时试验数据(如电池电压、电池表面*高温度、压力视频数据进行实验结果判定)针刺试验结束后电池应不起火，不爆炸、不冒烟；也是各电池厂家及研究所的检测设备。
Battery nail penetrating test equipment checks battery safety performance by nail penetrating test, judge test result by real time test data(like battery voltage, max temperature of battery surface, pressure video data), battery should no fire, no explosion, no smog after nail penetrating test; it is an essential test equipment for battery manufacturers and research institute.
Qc743老标准要求 Qc743 Old Standard Requirement：
用直径ψ3mm~ψ8mm的耐高温钢针、以lOmm/s~40mm/s的速度，从垂直于蓄电池模块极板的方向贯穿至少三个蓄电池单体(钢针停留在蓄电池中)
With diameter ψ3mm~ψ8mm high temperature resistant steel needle, lOmm/s~40mm/s speed, penetrate at least three storage battery monomer from vertical direction of store battery module pole board(steel needle stay in the storage battery)
Qc743新标准要求Qc743 New Standard Requirement：
用ψ6mm~ψlOmm的耐高温钢针(针尖的角度为60度，针的表面光洁、无锈蚀、氧化层及油污)、以20~30mm/s的速度，从垂直于蓄电池极板的方向，直至贯穿3个单体蓄电池(钢针停留在蓄电池中。试验后观察1h)
With diameter ψ6mm~ψ10mm high temperature resistant steel needle(the angle of needle point is 60 degree, needle surface finish, no corrosion, oxide layer and oil stain), 2Omm/s~30mm/s speed, from vertical direction of store battery module pole board, penetrate till three monomer storage battery(steel needle stay in the storage battery, observe 1h after test)
| 设备型号 Equipment | 测试空间 Test space(mm) | 设备外形尺寸 Machine Extermal Dimension(mm) |
| HBT-DZC-2T | 200x200x200 | W750xD650xH1800 |
| HBT-DZC-5T | 600x600x600 | W1000xD900xH2200 |
| HBT-DZC-9002D | 800x800x800 | W3000xD1200xH1300 |
| HBT-DZC-9002t | 1000x1000x1000 | W3300xD1500xH1500 |
| 辅助功能(选配) Accessibility(optional) | 电压、温度采集、视频监控系统、灭火系统、安全防爆系统、烟雾过滤系统 Voltage, temperature collection, video monitoring system, fire extinguishing system, explosion protection system, smoke filter system | |
| 针刺速度 Compression Speed | 0~80mm/min（可调 Adjustable），可按要求定制到200mm/min can customize to 200mm/min according to requirement | |
| 测试空间（mm） Test Space(mm) | 200x200x200mm、300x300x300mm (可按要求定制 Can customize according to requirement) | |
| 外形尺寸 External size | 依实际设计为准 Subject to actual design | |
| 选配标准 Option Index | 电压选择 Voltage options | 0-10V, 0-100V |
| 温度采集范围 Temperature Acquisition Range | 0~1200℃ | |
| 电压、温度精度 Voltage/Temperature Accuracy | ±%FS | |
| 电压分辨率 Voltage Resolution | 1mv | |
| 温度分辨率 Temperature Resolution | 0.1℃ | |
| 主要技术指标 Major Technical Index | 速度 Speed | 0~80mm/min（可调 Adjustable），可按要求定制到200mm/min can customize to 200mm/min according to requirement |
| 针刺行程 Compression Stroke | 0~1000mm范围内可选 0~1000mm range optional | |
| 结构 Structure | 立式、卧式（可根据实际尺寸选择）Vertical/ Horizontal type(choose according to actual dimension) | |
| 高温钢针规格 High Tmperature Ressistant steel Needle Specification | 直径ψ3mm~ψ8mm Diameter ψ3mm~ψ8mm | |
| 针刺方式 Nail Penetrating Method | 横向、纵向 Landscape orientation, Portrait | |
| 针刺变形量 Nail Penetrating Deformation Amount | 无（如需要有则可选电脑控制） No (if need, please choose computer control type) | |
| 针刺保持时间 Nail Penetrating Holding Time | 0~99小时99分99秒 0~99 Hour 99 Minute 99 Second | |
| 驱动方式 Driving Method | 液压 Hydraulic | |
| 针刺速度精度 Accuracy of Nail Penetrating Speed | ±0.1mm/s | |
| 力量精度 Force Accuracy | ±1% | |
| 结构 Structure | 箱体 Cabinet | 立式或卧式结构与控制部分分开 Vertical structure is separated from control part |
| 通讯 Communication | 无（如需要则需另选电脑控制系列） Non (if needed, please select computer-control system series) | |
| 耐高温钢针 High Temperature Resistant Steel Needle | 直径ψ3mm~ψ8mm,可按要求定制 Diameter ψ3mm~ψ8mm, can customize by requirement | |
| 数据采集模块 Data Acquisition Module | 独立远程采集隔离，多路电压、温度、电流采集通道、确保数据无误（选配）Independent remote acquisition isolation; multiple-channel voltage, temperature, current acquisition channel; | |
| 通道数量标配 Channel Quantity Standard Configuration | 2通道、4通道、8通道，多种数据采集系统（选配）2 channels, 4 channels, 8 channels, multiple data acquisition system(optional) | |
| 摄像监控系统 Camera Monitoring System | 测试区域装配高清摄像监控系统，并可远程控制，具有防爆功能（选配）Test area equipped with HD monitoring system, with remote control, and explosion-proof function(optional) | |
| 标准配置 Standard Configure | 针刺主机1套,控制柜1套，直径ψ3mm~ψ8mm耐高温钢针1套 Nail penetrating main body one set, control cabinet one set, diameter ψ3mm~ψ8mm high temperature resistant steel needle one set | |
| 测试夹具 Test Fixture | 特定制作，根据样品实际使用条件而定Specific production, according to the actual using conditions of sample. | |
| 电源电压 Power Supply | AC 380V 50Hz 三相五线制 three phases five wires | |
| 使用环境 Operation Ambiance | 0~45℃ | |
