PU胶保护膜
PU Protection Film
一、构成Structure
此类保护膜是以PET(聚酯薄膜)为基材，单面涂布PU胶水并贴合离型膜而成。
This kind of film is based on PET film as the substrate, single side coated with polyurethane adhesive and release liner laminated together.
二、产品特点Features
1）此类产品对金属、塑料、玻璃等各种被粘贴的物体具有合适的粘结强度，保持力性能良好；
This kind of film has a suitable and stable bond strength to the application surfaces, such as metal, plastics, glass etc.
2）低粘性，自吸附，易模切；
Low peel strength ，self-adsorption and easy to die-cut.
3）耐候性、耐热性、耐酸碱性能良好。
This kind of film has the good weather resistance, temperature resistance and chemical resistance.
三、应用领域 Application
1）面板运输保护和出货保护；
Surface protection of the product during transport and shipment.
2）各类镜片、屏幕工程保护；
Protection of screens and glass product.
3）各类硬化膜、高亮面表面保护；
All kind of hard coat film and smooth surface.
四、产品型号及性能参数Grades & Specification
| 常规出货规格（宽*长度） | 1240mm * 200m | |||||||||||||||||||||||||||
| 产品型号 Item No. | 性能参数 Specification | |||||||||||||||||||||||||||
| 基材厚度（mm) Backing thickness | 基材材质 material | 胶系 Adhesive type | 胶厚（mm) ±0.002mm | 总厚(mm) Total thickness | 抗静电类型 Antistatic type | 剥离力（g/25mm) Strength of Adhesion | ||||||||||||||||||||||
| U501 | 0.050 | PET | 亚克力 Acrylic | 0.010 | 0.060 | / | ≤3 | |||||||||||||||||||||
| U501E2 | 0.050 | PET | 亚克力 Acrylic | 0.010 | 0.060 | 胶抗 | ≤3 | |||||||||||||||||||||
| U501E3 | 0.050 | PET | 亚克力 Acrylic | 0.010 | 0.060 | 双抗 | ≤3 | |||||||||||||||||||||
| U751 | 0.075 | PET | 亚克力 Acrylic | 0.010 | 0.085 | / | ≤3 | |||||||||||||||||||||
| U751E2 | 0.075 | PET | 亚克力 Acrylic | 0.010 | 0.085 | 胶抗 | ≤3 | |||||||||||||||||||||
| U751E3 | 0.075 | PET | 亚克力 Acrylic | 0.010 | 0.085 | 双抗 | ≤3 | |||||||||||||||||||||
* 备注: 以上记载的数据均在实验室标准条件下测试所得，所有测试数据并非保证值，仅供参考
This document is only for internal reference， We do not undertake any responsibility due to reprint or circulate.
