扭剪扳手是拆卸指纹件及螺帽的机器化施工机器，存正在主动掌握扭矩性能。扭剪扳手宽泛使用于栓焊构造桥梁的架构，厂房、塔架及化工、冶金、火力发电设施的装置。重型机器、起重设施和车辆拆卸工作，以及对于螺纹紧固件的扭矩及轴向张力有严厉要求的场所。接下来我们来看看扭剪扳手的操作注意事项：
Torque wrench is a kind of mechanical construction machine for dismantling fingerprint parts and nuts, which can actively grasp the torque performance. Torsion wrench is widely used in bolt welding structure, bridge structure, plant, tower and chemical, metallurgical, thermal power facilities. Disassembly of heavy machinery, lifting facilities and vehicles, and places with strict requirements on torque and axial tension of threaded fasteners. Next, let's take a look at the operation precautions of the torsion shear wrench
扭剪扳手
Torsion wrench
1、接回电源前应先检查电源电压能否与本货物铭牌符合，能否有接地安装。当电源电压超过+10%时应采取稳压措施，要不会反应掌握精密度。接地没有良易形成事变。
1. Before connecting back the power supply, check whether the power supply voltage is consistent with the name plate of the goods and whether there is grounding installation. When the power supply voltage exceeds + 10%, the voltage stabilizing measures should be taken to ensure the accuracy. Grounding is not easy to cause trouble.
2、机器运用的条件量度为-10℃-40℃，过高过低都会反应掌握精密度。
2. The measuring condition of the machine is - 10 ℃ - 40 ℃. If the temperature is too high or too low, the precision will be mastered.
4、机器用来组装螺帽时，其扭矩没有得大于额外扭矩值。正常状况下，没有是本拉手拧紧的或者锈蚀重大的螺帽，没有宜用本拉手组装，免得形成机器保护。
4. When the machine is used to assemble the nut, its torque is not greater than the additional torque value. Under normal conditions, there is no nut tightened or seriously rusted by the handle, and it is not suitable to use the handle for assembly, so as to avoid the formation of machine protection.
5、变换旋转位置时，必需待发电机中止转动后停止，严禁正在运行中扳动正反电门。
5. When changing the rotating position, it is necessary to stop the generator when it stops rotating. It is strictly forbidden to pull the positive and negative switches in operation.
6、当拉手主动中止后即可抓紧电门待4-5秒后再停止开行拉手，要不拉手不能发动。
6. When the handle stops, you can hold on to the switch and wait for 4-5 seconds to stop the handle, or the handle will not start.
以上就是今天为大家讲解的关于扭剪扳手操作时的注意事项，如果您对扭剪扳手、电动扭矩扳手等产品信息有需求的话，您可以在网站留言咨询：
The above is what we should pay attention to in the operation of torque wrench. If you need product information such as torque wrench and electric torque wrench, you can leave a message on the website:
