广告招募

当前位置:中美贸易网 > 技术中心 > 所有分类

爱斯佩克ESPEC烘箱/干燥箱技术规格参数指标

2025年12月12日 08:35:20      来源:坚友(上海)测量仪器有限公司 >> 进入该公司展台      阅读量:18

分享:

爱斯佩克ESPEC烘箱/干燥箱技术规格参数指标
型号  Model SEG-021H, SEG-041H, SEG-081H, SEG-101H
循环方式 Circulation mode 强制热风循环换气方式  Forced hot-air circulator & venti lation system
进风量调节 Intake air adjustment
手动进风量调节  Manual adjustment
电源 Power supply  AC220V  1φ3W  50/60Hz  AC380V 3 φ4W  50/60Hz
功率Power (KVA) 3.5(4.5)     4.4(6.0) 6.1(8.2) 7.9(9.7)
zui大电流Maximum current(A) 15.6(20.2)  7.9(10.2) 10.4(13.5)  13.3(16.0)
可运行的环境温度 Operating temperature 0℃~+40℃
性能Performance 
温度范围 Temperature range
环境温度+20℃~+200℃ (带H的为环境温度+20℃~+300℃)
Ambient temperature +20℃~+200 ℃ (H stands for 20℃~+200 ℃)
温度波动度 Temperature fl uctuation
±0.2℃ at100℃
±0.3℃ at200℃ 
±0.4℃ at300℃ 
±0.3℃ at100℃
±0.4℃ at200℃ 
±0.5℃ at300℃ 
温度偏差 Temperature deviation
±1.5℃ at100℃
±2.0℃ at200℃ 
±3.0℃ at300℃ 
±2.0℃ at100℃
±2.0℃ at200℃ 
±3.0℃ at300℃ 
±2.0℃ at100℃
±2.0℃ at200℃ 
±4.0℃ at300℃ 
温度上升时间 
Temperature heat-up rate
从环境温度到200℃ 40分钟以内;从环境温度到300℃,60分钟以内
Ambient temperature~200℃,within 40 min; ambient temperature~300℃,within 60 min
定时功能 Timer
1分~99小时59分 1Minute~99 Hours 59 Minutes
安全保护装置 Safety devices
电源用漏电开关、送风机温度开关、温度保险丝、配电室门开关、加热器过负荷短路保护、独立温度过升防止器
Leakage breaker for power suppy 、Air Circulation temperature switch、Thermal fuse 、Electric parts 
compartment door switch、Overload and short circuit proteciton for heater 、Over-heat protector
内容积 Inside capacity(L) 252 448 800 1000
重量 Weight(kg) 150 210 400 500
内部尺寸 Inside dimensions W×H×D (mm) 600×700×600  800×800×700   1000×1000×800   1000×1000×l000
外部尺寸Outside dimensions W×H×D(mm) 1240×1100×840 1450×1215×980   1650×1645×1085  1650×1645×1300

版权与免责声明:
1.凡本网注明"来源:中美贸易网"的所有作品,版权均属于中美贸易网,转载请必须注明中美贸易网。违反者本网将追究相关法律责任。
2.企业发布的公司新闻、技术文章、资料下载等内容,如涉及侵权、违规遭投诉的,一律由发布企业自行承担责任,本网有权删除内容并追溯责任。
3.本网转载并注明自其它来源的作品,目的在于传递更多信息,并不代表本网赞同其观点或证实其内容的真实性,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品来源,并自负版权等法律责任。 4.如涉及作品内容、版权等问题,请在作品发表之日起一周内与本网联系。