快换式上熔胶，预留PUR端口，胶锅液位高精仪器监测，自动预熔，自动抽胶粒。

The pre-melt system with PUR terminal reserved equips with glue level sensor, EVA glue pre-melts and automatically applies.

胶箱储量大，可满足长时间供胶，减少人工加胶频率。

With the large capacity of glue box, it can satisfy the EVA long-time supply and reduce times in manual application.

采用四组高频马达电机，实现稳定、更快速的封边带仿形圆角修边。

Equips with 4 trimming motors, fast and stable in corner chamfering.

用于消除修边切削时产生的波纹痕迹，使板材更加美观。配备定向吹丝功能。

Trim off the cutter marks left on panel surface.Equips with blowers.

快速切换加工不同厚度的板件，减少调机时间，提高效率。

Precise & quick adjustment according to workpiece thickness, reducing adjustment time and improving efficiency.

记录设备运行信息。

Real-time recording of machine operation information.

压紧接触面积大，确保木板高速输送的稳定性，提升封边品质。

A large contact area on the panel ensures a stable conveys with high speed, improving edging quality.

标配40mm铣刀(选配65mm)。

Standard with 40mm milling cutter (optional 65mm).

双铣刀修饰开料后产生的波纹痕迹、毛刺或不垂直等瑕疵，使封边条和板材贴合更紧密，提高封边效果。

Effectively mill off the defects left after cutting, ensuring a close sticking and improving edging results.

预热板件，提升板材与边带的粘合效果。

Panel preheats, improving a better adhesiveness between panel and tapes.

强力压合边带，提高封边粘合效果。

Strongly press edge tape to improve edge banding effect.

快速切断板件前后多余边带，前后单独导轨配置，高效，快捷。

Fast cut off the recessives tapes in front&rear.

配备自动润滑系统，根据运行次数自动注油，确保齐头机构运行顺畅，提升使用寿命。

Automatic lubrication according to running status, ensures a smooth working and pro-long service life.

清除板件上下面的余胶和碎屑。

Clean the tape chips or glue off panel service.

可在待封边的板件上下面喷一层脱模剂，有效防止封边过程中溢出的热熔胶粘染板面。

Prevents the adhesion of hot melt glue residues on the top and bottom of workpieces, so creating optimum workpiece quality.

板材上下表面喷涂清洁剂，配合抛光机构清洁板材上下面的余胶和碎屑。

Application of the cleaning agent on top&bottom of workpiece to perfectly work with buffing units for clean and best edging results.